Aidite 3D PRO Zir – More than nature Find natural shade gradient, translucency, and strength in 3D Pro Zir Strength and Translucency: 3D Pro zir is fabricated with the most advanced production processes at Aidite, producing a layerless, natural shade gradient, with optimal strength and translucency, transitioning from cervical to incisal areas of the restoration.
With a 3-point flexural strength of >1050 MPa, 3D Pro zir ensures aesthetic results while being suitable for all indications from single crowns to 14-unit bridge structures.
Properties: Sintered density: >6.0g/cm3
Coefficient of thermal expansion K-1(25~500°C): (10.5±1.0)x10-6
Surface monoclinic phase content after accelerated aging: <5%
Chemical solubility: <100µg/cm2
Sintering cycles: The 3D Pro zir range allows fast high-performance sintering, with 2-hour sintering or more conventional cycles for larger spans. Enabling shorter production time, reduced costs, and faster delivery times.
Indications: - Veneers
- Inlays
- Anterior crowns
- Posterior crowns
- Full arch crown bridges
- Full crown bridges
- Full contour screw retained bridges
- Implants
Shades Available: A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4, OM1, OM2, OM3.
Sizes Available: Discs: 95mm and 98mm diameter discs in heights 12, 14, 16, 18, 20, 22, 25mm
Blocks: 20*15*14/20*15*19/40*15*14/40*15*19/55*15.5*19/65*25*22 for CEREC milling.
Compatibility: Standard open system, Girrbach system, Zirkonzahn system, Sirona system.