Radius Cutters - double tooth 1.0mm diameter
This special dental radius cutter has a semicircular rounded tip. It is available with cutting-edge diameters of 0.3 mm to 2.0 mm. While the 2.0 mm tool is mainly used for efficient roughing, tools with smaller diameters of 0.3 or 0.6 mm are mainly used for finely finishing or carving out fissures. Due to the especially long undercut of these tools, undercuts in the material can also be reached easily.
Depending on their field of application, the radius cutters have one to four cutting edges: for PMMA and wax there are, for instance, extremely sharp single-tooth cutters available with a very low tendency to clogging. On the other hand, the 2 mm cutters for the abrasive zirconia have three cutting edges and the CoCr cutters even have four, in order to reduce the wear for each cutting edge and to ensure greater process reliability.
Dental milling cutters from vhf are made from a superfine grain carbide mixture from German production. It is characterized by high edge strength and outstanding wear resistance – further improving work piece quality and service life.