Dess Transfer for Osstem TS/ Hiossen ET

DESS Impression Transfers have an area of large dimensions to facilitate an easy and safe re-positioning for the closed tray impression. Positioning marks separated 1mm allow the location of the implant head. The Impression Transfers are made of stainless steel AISI-303 for a better preservation of the implant characteristics.

Transfers include two screws (for open and closed tray).

The screw is made of Titanium Grade 5 ELI for use with closed tray has a minimum external height in order to be used in small mouth openings. The screw head for the use with open tray has three tightening systems: stretch marks which allow a direct manual tightening, the hexagon, Torx® or UG for the tightening with a screwdriver and cutting for the use with a clinical spatula for extreme locations.