SalvinTorq Adjustable Torque Wrench Kit With 6 Driver Tips

• Torque settings lock into select location for accuracy and repeatability
• Ratchet clutch disengages (slips) when torque is applied to avoid over torquing
• Nine Torque Settings: 15, 20, 25, 30, 35, 40, 45, 50 & 60 Ncm
• Lubrication Hole At 15Ncm Setting
• Wrench head accepts the standard 4mm square connection

Tightening with the correct torque minimises the risk of the screw working loose and improves the precision during bridge fabrication. Torque control can also reduce the risk for stress being built into the restoration and prevents component fractures. 

Kit Contains:

• .048 Hex Square Connection Abutment Driver Tip - 6mm
• .048 Hex Square Connection Abutment Driver Tip - Long - 12mm
• SalvinTorq® Adjustable Torque Wrench
• .05 Hex Square Connection Abutment Driver Tip - 6mm
• .05 Hex Square Connection Abutment Driver Tip - Long - 12mm
• Thumb Knob For Driver Tips
• PROC Driver - 6mm
• PROC Driver Long - 12mm
• Torq Cassette

Easy to use
Insert the screw or abutment into the implant with the appropriate driver and thumb knob manually and tighten with finger pressure. Final seat with the SalvinTorq adjustable torque wrench with the torque setting recommended by the implant system. Pre-load the screw abutment using the torque wrench in the same way as a ratchet wrench. The wrench will slip when the selected torque is applied.

Click here to download the Technique Manual.